基于S7200PLC的厂用气管网压力控制系统设计969687.doc
《基于S7200PLC的厂用气管网压力控制系统设计969687.doc》由会员分享,可在线阅读,更多相关《基于S7200PLC的厂用气管网压力控制系统设计969687.doc(85页珍藏版)》请在启牛文库网上搜索。
1、兰州理工大学毕业设计说明书 基于S7-200PLC的厂用气管网压力控制系统设计基于S7-200PLC的厂用气管网压力控制系统设计摘 要 本设计介绍了以S7-200PLC为核心的管网压力控制系统的组成及工作原理,阐明了变速积分PID控制算法在管网压力控制系统中的应用,并给出了系统的硬件与软件设计的实现方法。在A/D转换中,使用了模拟量输入模块EM231。在D/A转换中用了模拟量输出模块EM232,可以实现输出05V的输出电压。硬件设计由主电路和控制电路两部分完成,软件设计中对A/D转换过来的数字信号进行变速积分PID控制。这种控制方法特点是,当偏差大时积分累积速度慢,积分作用减弱;偏差小时,积分
2、累积速度快,积分作用增强。这样能满足系统准确性的要求。关键词: 变速积分;压力控制系统;S7-200PLC;PID控制AbstractThe paper introduces the composition and work principles of pipe network control system ,based on S7-200PLC. It illustrates the application of PID with variable integral action in air pipe network pressure control system.The design o
3、f hardware and software are introduced too. It uses analog input module EM231 in A/D transition and analog output EM232 in D/A transition. In D/A transition this module can be output 05 voltage. Hardware introduces the design of main circuit and control circuit. In design of software, it finishes PI
4、D control for digital signals produceing in A/D transition. The characteristic of this control method is, when the warp is big the integral rate will be slow, and the integral effect would be weaken; but when the warp is small the integral rate will fast, and the integral effect would be toned up. I
5、n this way it can satisfy the veracity of this system.Key words: Variable Integral action; Pressure control system; S7-200PLC; PID control. 目录摘 要IAbstractII第一章 绪论11.1 变频器技术的发展11.2 空气压缩机系统控制11.3 供气系统压力控制21.3.1 加卸载供气控制21.3.2 转速控制21.4 本设计的目的和意义2第二章 设计任务、要求及参数42.1 毕业设计的技术背景和设计依据42.2 毕业设计的任务42.3 毕业设计的主要内
6、容、功能及技术指标5第三章 系统方案设计63.1 系统工作原理63.2 方案的比较63.3 方案的确定73.3.1 设计思想73.3.2 工作原理8第四章 硬件设计94.1 可编程控制器介绍94.1.1 可编程控制器的工作原理94.1.2 可编程控制器的主要性能指标114.1.3 可编程控制器的设计原则114.1.4 S7-200PLC介绍124.2 主电路设计144.2.1 变频器部分144.2.2 软起动部分214.3 控制电路设计274.3.1 模拟量控制系统设计274.3.2 PLC控制部分284.4 S7-200PLC与计算机的通信314.5 变频器与PLC的通信314.6 压力传感
7、器的介绍324.6.1 力/压力敏传感器324.6.2 CYB20S普通型压力传感器334.7 压缩机的主要种类354.7.1 Mattei 滑片机特点354.7.2 所选压缩机的技术性能指标354.8 元器件选择364.8.1断路器364.8.2接触器364.8.3电磁式继电器364.8.4 热继电器374.8.5 熔断器38第五章 软件设计395.1 程序设计思想395.2 程序流程图405.2.1 主程序流程图405.2.2 变速积分PID程序流程图415.3 地址分配42总 结43参考文献44外文原文与译文45致 谢77附录一78元器件清单78附录二80程序清单8080第一章 绪论1.
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- 基于 S7200PLC 厂用气 管网 压力 控制系统 设计 969687